TTR Bikes and projects
  TTR400 | CB400F Yoshimura Racer | TTR Bikes and projects | CR750 Replica build | Some hot CB's | parts page 1 | Parts Page 2 | Parts Page 3 |  Performance | Links | Guest Book | Contact | In the works..  

Some photo's of my own bikes and a few of some restoration projects that I am busy with. Enjoy.
I do not normally build bikes or do restorations for paying customers, however just lately I have had many requests to do this. So I might just undertake a restoration or a full racer build for you.


1975 CB400F Custom.
For build pages and more photo's of all the bikes on this page, click on the photo.
1975 Varnish Blue Restoration.

Nearly there with this one.

Only the OEM silencer to get, then this one will be finished.

1975 CB400F Yoshimura Racer.

Links to the build page and more.

Busy upgrading the forks to 35mm and a more powerful brake system.

CB400F Rickman.

Well this is what happens when you have a pile of parts in boxes. Another 400 is resurected in the style of the 70's Rickman cafe bikes.

I might change the colour of this one. Don't know to what yet.

More details coming soon.

CB400F track day special.

As above, this is what happens when you have too many spare frames, they turn into bikes.

This is going to be a stripped down lightweight bike with modern suspension and brakes, Will be fitted with a headlight / tailight and a rev counter only. Probably do a mild performance motor.

1988 VFR750R RC30
One of the original 10 imported into South Africa. This one had many non std parts fitted and I am slowly returning it back to it's former glory.
Z50A K2 Export model.

Nearly there with this great little bike.

This is getting new valves and piston, still to be fitted. bottom end also completely restored.

Z50A K1

Been busy for the last 6 months on this one, many parts were missing in action. Quite a mission to source the correct parts.

 Finished....

This is for a customer.

CB350F Project MV.

This is Daves 350F Fuly fitted with TTR parts.

* 4-4 Exhaust system.

* CB350F motor, re-sleeved and fitted with CB400F 54.5mm pistons, modified with deeper valve pockets.

* Full spec cyl head with 23.0mm exhaust valves and 27.5mm inlet valves.

*Lightened,knife edged polished and balanced crank with stock rods.

*Webcam #69 full race camshaft and Kibblewhite springs.

* Undercut gearbox.

*CR26 Carbs.

*Dyna S with dyna 3 Ohm coils.

CB550 Classic racer.

This is also my buddy Daves bike, going for the same MV style as his 350/400F. Rolling chassis virtually there. Have not started on the motor yet, still deciding what to do. It will have a 4-1 exhaust system and dual discs up front.

 Photo I have is way to big, will update shortly.

CB1100R Racer
Building this for a friend to use in classic racing/parades and the odd track day. Will only get back to this after the other projects are done. Motor has been done. Many small jobs to do, like fitting the fairing, exhaust system to fabricate etc.
CR750 Replica

Decided to build a replica of the Daytona Dick Mann bike, or as near as I can get it. I am busy with all the frame mods at moment. Hopefully should be finished soon with the help of my friend mark.

It has taken me the best part of 7 months just to get all the parts needed and to fab up from old pics all the brackets required etc.
CB750K2 custom Cafe build

Full rebuild for a customer, received this CB750K2 in boxes of parts. getting a full engine rebuild as with the rest of the bike. The motor has a 900 piston kit installed.

Done and delivered.