SOHC CB500/550 CB750K/F
  TTR400 | CB400F Yoshimura Racer | Chassis / Frame | Chassis / Frame | Engine/Motor | Engine/motor  |  Performance | Carbon Fiber products. |  SOHC CB500/550 CB750K/F | 1975 CB400F Restoration | JPS CB400F street special | Some hot CB's | Links | Guest Book | Contact | CB350F Project MV  

A selection of parts for the larger CB Fours.

A range of cafe racer products for the CB750K,CB750F,CB500,CB550K,CB550F,  more parts are under development.  Most parts in stock at www.400fourstore.com


Billet points cover CB750 SOHC. Part # 750-049

Engraved with the Honda wing logo.

* Anodised in Silver or Black.

* In stock now at www.400fourstore.com

Aluminium billet top tree nut. Part # 400-006

Machined from 6061 T6 aluminium.

Available for the CB750K and F models, CB500, CB550K

Anodised or polished finish.
Race oil filler cap. Part # 400-041

Aluminium billet, 19mm hex head pre drilled for lockwire.

Anodised or polished finish.

Available for the CB500, CB550K, CB550F
Billet tappet covers. Part # 400-044

Set of 8, or set of 4

Available for the CB750K,CB750F,CB500,CB550K,CB550F, all years. CB/CL 350 twin,GL1000 75-79,GL1100 80-81,Sl350,CB360.

Polished or anodised in a range of colours.

19mm Hex head.

Uses the stock o-rings. 

Front fork spring pre-load adjusters - Part # 750-064

Machined from solid 6082T6 Aluminium.

* What you have always wanted......Now you can set up the front end pre-load for the correct sag. Just like the modern bikes.

* Now available to fit: All CB750 K,F and A models. CB550 F and K models. CB500T, CB450T K3/4, XL350 76/77/78, XL250 K1/2.

* Replaces OE part # 90123-300-000.

* Available in the anodised colours shown and also Gold (not shown)
CB750 K or F Lower triple tree. 750-002

CNC machined from 6082T6 alloy.

* 7075T6 aircraft grade aluminium steering stem.

* Replaceable steering stops.

*F Model: 182mm fork center, with a 50mm offset.

*K Model: 182mm fork center,with a 60mm offset.

* Manufactured to order.

* Other sizes to order. Contact TTR for more details.
CB750 K or F Upper triple tree. 750-001

Upper triple tree, flat design (not stepped down) No ignition key or clock mounts.

* K Model: 182mm spacing,with 60mm offset.

*F Model: 182mm spacing,with 50mm offset.

*New 3D design under development.

* Clock mounts on request, to special order.

* Complete triple tree set part number 750-004.
Aluminium billet clip ons. Part # UNI-003

CNC Machined from 6061T6 aluminium. Normally sport bike clip-ons have an angle of 9 or 10 degrees, I have found that for street cafe type bikes a 0 degree angle is much more comfortable, easyer on the wrists.  Also is much better for mounting the master cyl.

* Sizes:  35mm and 33mm

* Bars are 250mm long. 300mm also available.

* One single M10 stainless steel allen clamping bolt. 

* Anodised silver, satin silver (natural) or black.

Machined alloy chain adjusters. Part # 750-026

Replaces superceded Honda part # 95014-19000

* Fitment for CB500K0-K2, CB550K 76/78, CB750K0-K6

*Uses M8 adjuster bolt. (not supplied)

* Anodised or polished finish (semi polished shown)

 

Headlamp brackets. Part # UNI-004

* Sizes: 35mm and 33mm. (130mm x 26.5 deg)

* Anodised satin silver (natural), silver or black.

* 2 piece design, no need to remove top triple to fit.

* Can be fitted in the up position or parallel for deeper headlamps.

* Stainless steel allen cap screws.

* Depending on the fitment and type of lower triple, steering stops might require adjusting for tank clearance.

* UPDATE: This is now discontinued. New design shortly.